However, the locking mechanism is the same as for the multi-point locks. Some are available with removable barrels, which we can also supply. These types of locks are used on a wide range of office furniture and engage by rotating the handle after inserting the key to unlock. They require a hole going through the door for the cylinder to fit into, and they are easy to replace with a fixing screw located on the edge of the door. These are most commonly used on doors and are the most widely used door lock. Domestic doors and windows will have up to five fixing points for added security. The lock body may also have a dead bolt that secures the door at the centre point. Normally fitted to cupboards and doors, these can be attached in multiple points with the aid of locking bars that lock top and bottom of the door when the key is turned in the lock. Night Latch locks are a spring loaded lock that requires a hole for the cylinder and is mounted onto the inside of the door it is operated by a latch on the inside and can be opened by a key from the outside of the door. This type of lock requires a pocket/hole for the lock body to fit into and would be most commonly found on older buildings and properties in the UK. The most common type of door locks are the sash deadlock (mortice lock). †Please note, we cannot be held responsible for the content of external websites and by using the links stated to access these separate websites you will be subject to the terms of use applying to those sites Door lock Research commissioned by .uk carried out with 1163 UK adults in During 2014/2015 by Ekomiĩ8.83% of customers who left a replacement key review recommend .ukĪverage rating 4.9 out of 5 for replacement keys, from 1163 reviews left by .uk customers (as at October, 2015) They can be straight, cranked or hooked depending on the furniture it is being fitted to. The cam is fitted to the end of the lock body and comes in various shapes and sizes. When the key is turned in the lock this rotates a cam, which in turn locks/unlocks the locker or cabinet. A third method of fixing cam locks is a snap-in fix which is for easy fitting into sheet metal panels of less than 2mm thickness. Some lock bodies are milled to be fixed by a horseshoe clip. Most cam locks have a threaded body, which can be fitted to the furniture by a nut. The lock consists of a barrel, the length of which can range from 8mm to 32mm but typically about 20mm. More about each type of lock that we supply: Cam locksĬam locks are the most common lock used on office furniture such as lockers and filing cabinets.
0 Comments
Leave a Reply. |